scsi bus造句
例句与造句
- When this error occurs , the scsi bus resets
发生这项错误时, scsi汇流排会重设。 - Is the scsi bus to be booted from , this is
是启动的scsi总线, - In my case , the emulated firewire scsi bus in question is
在我的例子中,讨论的仿真firewire scsi总线是 - In such a case , the scsi bus will be the performance - limiting factor
在这种情况下, scsi总线将成为限制性能的因素。 - Anything on scsi bus 0 can be shortened to 1 , 0 , leaving off the first 0
Scsi总线0上的设备都可以缩写为1 , 0 ,即省去头一个0 。 - It's difficult to find scsi bus in a sentence. 用scsi bus造句挺难的
- Number of tape devices that share a small computer system interface scsi bus
共享一个小型计算机系统接口( scsi )总线的磁带设备数。 - Never place a tape drive on the same scsi bus as disks or a cd - rom drive
永远不要将磁带驱动器与磁盘或cd - rom驱动器放置在同一个scsi总线上。 - When using mscs , one node must be in control of the shared scsi bus prior to the other node coming online
使用mscs时,在其他节点在线之前,一个节点必须受共享scsi总线的控制。 - If your hardware uses a 53c9x - based scsi bus , then you may need to include the kernel parameter
如果您的硬件中包括基于53c9x的scsi总线,那么您需要包括下面的内核参数mac53c9x 1 , 0 - If you have a scsi bus , make sure you understand and follow the manufacturer ' s instructions for termination of the scsi bus
如果有scsi总线,请务必了解并遵循制造商的指导终止scsi总线。 - The first three numbers for each item refer to scsi bus , device id , and lun logical unit number , respectively
每一项的前三个数字分别指scsi总线、设备标识和lun (逻辑单元号, logical unit number ) 。 - Drives whose native transfer rate exceeds 50 percent of the scsi bus speed must be on a dedicated scsi bus to avoid loss in performance
本机传输速率超过scsi总线速度的50 %的驱动器必须在专用scsi总线上。 - Thankfully , there is a patch available for 2 . 4 kernels that causes the scsi bus to be scanned on startup see
令人感到高兴的是,对于导致scsi总线在启动时被扫描的2 . 4内核有可用的修补程序(有关更多详细信息,请参阅 - The maximum blocksize is 64 kb . many high - speed tape drives perform better if they have a dedicated scsi bus for each tape drive used
许多高速磁带驱动器如果对每个所使用的磁带驱动器有专用scsi总线,将运行得更好。 - We then loop , rescanning the scsi bus by echoing a command to a special file in the proc pseudo - filesystem and calling
)然后我们进行循环,重新扫描scsi总线(通过将命令回送到/ proc pseudo - filesystem中的特殊文件,并调用
更多例句: 下一页